|
The best adhesive we have found to keep light seal foam in
place is Goodyear Pliobond, a rubber based contact cement. Available at
many hardware stores in the United States. It is available in a tube or
bottle. Please do not ask us about other adhesives as we do not use them.
Application is the easiest by thinning it slightly with
Methyl Ethyl Keytone, filling a syringe and then carefully applying a small bead
of cement, then pressing the seal in place and letting it dry. Be careful not to
apply to much adhesive as it you do not want the foam full of cement.
Sometimes it can be just as easy to apply a thin line
of cement using a toothpick.
NOTE: Pliobond and MEK are
both extremely flammable so use care and a well ventilated work area.
|
